Date: 11/08/2010

New 2-cell supercapacitor chargers from Linear Tech

Linear Technology has introduced supercapacitor chargers numbered LTC3625 and LTC3625-1for use in portable and data storage applications. The LTC3625/LTC3625-1 includes an internal buck converter between VIN and the series capacitor mid-point VMID to regulate the voltage on the bottom capacitor, as well as an internal boost converter between VMID and VOUT to regulate the voltage across the top capacitor. The devices can charge two supercapacitors in series from a 2.7V to 5.5V current-limited supply to a pin-selectable output voltage (4.8V/5.3V for LTC3625 or 4V/4.5V for LTC3625-1). LTC3625/-1 is suggested for small form factor backup or high peak power systems, USB-powered equipment, industrial PDAs, portable instruments and monitoring equipment, power meters, supercap backup circuits and PC card/USB modems.

The output current of the LTC3625/-1's buck converter is user-programmable via the PROG pin, and the input current of the boost converter is set at 2A (typical). The resulting maximum charge current is 1A continuous with two inductors, and 500mA with a single inductor configuration. Each capacitor is protected against overvoltage by internal voltage clamps (2.4V/2.65V selectable for LTC3625 or 2.0V/2.25V selectable for the LTC3625-1). The LTC3625/-1's automatic cell balancing feature maintains approximately equal voltages across both cells, eliminating the need for balancing resistors while protecting each supercapacitor from overvoltage damage.

The LTC3625 and LTC3625-1 operate at a quiescent current of 50uA when the output voltage is in regulation. When the input supply is removed or the EN pin is low, the LTC3625/-1 automatically enters a low current state, drawing less than 1uA from the supercapacitors. Linear says the basic charging circuit requires only three external components (one inductor, one bypass capacitor at VIN and one programming resistor) and is highly compact, offered in a tiny 12mm2 package footprint. Additional protection features include over-temperature protection for momentary overload conditions, over-current limiting and reverse- current protection in which the device will continue to regulate at its programmed current even into a grounded output.

Package: Thermally enhanced, 12-lead, low-profile (0.75mm) 3mm x 4mm DFN

Operating temperature range: -40°C to 125°C

Price:
E Grade starts at US$3.00 for 1,000-piece quantities.
I Grade starts at US$3.45 for 1,000-piece quantities.